4-12kW 5U Subrack Embedded DC Power System in White or Black for Industrial Efficiency ET48200-003
Introduction
5U Sub-rack power supply, 5U height compact design to meet critical application needs of fiber and microwave transmission, access device, switch. The system's maximum current is 200A, with AC/Battery/Load MCBs. The cables are front accessing with MCB and busbar.
Key Features
- Standard 19-inch width which has the advantage of wide use
- 5U height compact design, space and installation cost can be saved
- Front operation and cable accessing, good-looking and safe maintenance
- Perfect battery management, prolongs the life of the battery well provide
- various communication ports, RS485, internet port, dry contacts, etc.
- which enables flexible networking and remote monitoring
- Rectifier and controller are hot pluggable, easy and quick on-line maintenance
- Wide input voltage range(85-300Vac) the power grid is adaptable
- The area below the power supply supports the addition of MPPT and inverter power supply slots
Application Scenarios
- Wireless base station
- Transmission network
- Communication network of enterprises
ET48200-003 Specifications
| Type |
4~12kW 5U Subrack |
| System |
Dimension |
482.0(W)*350.6(D)*5U(H) |
| Weight |
≤20kg (without rectifiers) |
| Cooling mode |
Natural cooling |
| Installation mode |
Installed on 19-inch rack or inside the cabinet |
| Cabling mode |
Top inlet and top outlet |
| Maintenance mode |
Front maintenance, support module grade change |
| Protection level |
IP20 |
|
AC
Distribution
|
Input mode |
220VAC single phase |
| Input capacity |
1×100A/2P |
| Input frequency |
45~65Hz, rated value: 50Hz/60Hz |
| AC SPD |
20kA/40kA, 8/20μs |
| Output capacity |
1×16A/1P, 1×10A/1P |
|
DC
Distribution
|
Output voltage |
-43~-58VDC, rated value: -53.5VDC |
| Maximum capacity |
12kW(4KW*3) |
| Battery breakers |
2×125A/1P |
| Load breakers |
LLVD:2×63A/2P, 2×32A/1P, 2×16A/1P
BLVD:1×32A/1P, 1×16A/1P, 2×10A/1P, 1×6A/1P
|
| DC SPD |
10kA/, 8/20μs |
| Rectifier |
Input voltage |
85VAC～300VAC, rated 220VAC |
| Efficiency |
＞96.6% |
| Rated power |
4000W(176~300VAC) |
| Working temperature |
-40℃~+75℃(fully output below 50℃) |
| Dimension |
106.5mm(W)×286mm(D)×41.5mm(1U/H) |
| Weight |
≤2.1kg |
| Cooling mode |
Forced cooling |
| Power factor |
≥0.99 @220Vac 20-100% Load |
|
Controller
|
Signal input |
3 AI(2 Battery temp., 1 ambient temp.) ,8 DI ,2 RS485. |
| Alarm output |
8 dry contact |
| Communication port |
LAN,USB, RS485, SNMP |
| Display mode |
LCD |
| Environment |
Operating temperature |
-40℃~+70℃ |
| Storage temperature |
-40℃~+70℃ |
| Operating humidity |
5%~95%(non-condensing) |
| Altitude |
0~3000m(If the altitude is within the range of 2000m to 3000m, the maximum operating temperature decreases by 1℃ as the altitude increases by 200m.) |
FAQ:
Q: What is the brand name of this Industrial Power Supply?
A: The brand name is ESTEL Embedded Power System.
Q: What is the model number of this Industrial Power Supply?
A: The model number is ET48200-003.
Q: Where is this Industrial Power Supply manufactured?
A: This product is manufactured in China.
Q: What is the input voltage range of the Industrial Power Supply?
A: The input voltage range is 90V-264V AC.
Q: Does the Industrial Power Supply have overvoltage protection?
A: Yes, this Industrial Power Supply is equipped with overvoltage protection.
